 |
Zenoah alloy Intake Manifold
After extensive R&D
Top Secret Boats has designed this new alloy
intake manifold kit for your Modified or
Stock Zenoah 231/260 engines.
"No more cracked or
warped manifolds". Comes complete with stainless steel
mounting bolts and nylon gaskets. Available in
plain alloy
finish.
PRICE:
$44.00
inc GST.
Export price
AU$ 40.00 |
 |
Needle lock for 257 Carb.
If your tired of your
carb going out of adjustment after you have spent
hours adjusting it for the best settings, this
Carb Lock will prevent that from happening. It's
much nicer and much more reliable then just some plain fuel line that most
boaters use.
As far as weight and mass, this lock is so small
it weighs 0.1 once (that's just 3 grams).
That 0.1 of an
ounce will not keep you from winning races but if your
needles move at all you can be coming in last or not finishing at all. So
this carb needle lock can lead to hours of
reliable Racing and Fun.
PRICE:
$14.60
each
inc GST.
Export price
AU$ 13.30 each |
 |
Zenoah Engine Mount with Top Coil Mount
This
Engine Mount is pre-assembled and made for 5"
engine rails. Made
from 6061-T6 aircraft quality aluminium for 5"
engine rails and includes
vibration reducing rubberized bushings. This mount has a built-in
CENTER Coil Relocator and is designed to fit both Zenoah and Quick Draw
engines. Plain alloy
finish.
PRICE:
$79.00
inc GST.
Export price
AU$ 71.85 |
 |
Zenoah Engine Mount with Side Coil Mount
This
Engine Mount is pre-assembled and made for 5"
engine rails. Made
from 6061-T6 aircraft quality aluminium for 5"
engine rails and includes
vibration reducing rubberized bushings. This mount has a built-in
SIDE Coil Relocator and is designed to fit both
Zenoah and Quick Draw engines. Plain alloy
finish.
PRICE:
$79.00
inc GST.
Export price
AU$ 71.85 |
 |
1/4"
Gas Stinger Drive This
pre-assembled Gas Stinger Drive unit is made from 6061-T6
aircraft quality aluminium. This drive is designed for Mono and Crackerbox
hulls and features a 6 degree adjustable tilt and the Stinger can be
adjusted in or out up to 3/4". Comes in
plain alloy finish.
Note: Stinger
does not include prop shaft bushing.
PRICE:
$107.00
inc GST.
Export price
AU$ 97.30 |
 |
1/4"
Gas Stinger/Rudder Kit This KIT is used on Mono Hulls and the rudder extends out 6-3/4" from the
transom to the trailing edge of the rudder. The 2 oversized water intakes
can be used to cool the engine and the exhaust system simultaneously.
Additional feature incorporates a breakaway rudder system.
Made from
aircraft quality
aluminium.
Plain alloy finish.
Please note the stinger portion of this kit
does not include the
propeller, drive dog, prop shaft,
prop shaft bushes or bullet nut. They are shown for illustrative purposes
only.
PRICE:
$182.00
inc GST.
Export price
AU$ 165.45 |
 |
Gas Skeg Strut
Gas Skeg Strut with Brackets to suit 1/4" shaft.
Made from
aircraft quality aluminium.
Plain alloy finish.
Note: Strut
does not include prop shaft bushes.
PRICE:
$58.00
inc GST.
Export price
AU$ 52.75 |
 |
Gas
3" Strut
Gas 3" Long strut with Brackets to suit 1/4"
Shaft. Made from
aircraft quality
aluminium.
Plain alloy finish.
Note: Strut
does not include prop shaft bushes..
PRICE:
$47.50
inc GST.
Export price
AU$ 43.20 |
 |
Gas
4" Strut
Gas 4" Long strut with Brackets to suit 1/4"
Shaft. Made from
aircraft quality
aluminium.
Plain alloy finish.
Note: Strut
does not include prop shaft bushes.
PRICE:
$52.00
inc GST.
Export price
AU$ 47.30 |
 |
4" Offset Rudder with Twin Pickups
This pre-assembled
4" Offset Rudder kit is made from aircraft quality
aluminium.
Widely
used on Mono, Crackerbox, Cat and Sport Hydro Hulls and extends out
4" from the transom to the trailing edge of the rudder. The 2 oversized
water intakes can be used to cool the engine and the exhaust system
simultaneously. Additional feature incorporates a breakaway rudder system.
Plain alloy finish.
PRICE:
$88.50
inc GST.
Export price
AU$ 80.45 |
 |
5" Offset Rudder with Twin Pickups
This pre-assembled
5" Offset Rudder kit is made from aircraft quality
aluminium.
This KIT is designed for use with our "Stinger Drive" and is widely used
on Mono Hulls. It extends out 5" from the transom to the trailing edge
of the rudder. The 2 oversized water intakes can be used to cool the engine
and the exhaust system simultaneously. Additional feature incorporates a
breakaway rudder system .
Plain alloy finish.
PRICE:
$91.00
inc GST.
Export price
AU$ 82.75 |
 |
6 3/4" Offset Rudder with Twin Pickups
This pre-assembled
6 3/4" Offset Rudder kit is made from aircraft quality
aluminium.
This KIT is designed for use with our "Stinger Drive" and is widely used
on Mono Hulls. It extends out 6-3/4" from the transom to the trailing edge
of the rudder. The 2 oversized water intakes can be used to cool the engine
and the exhaust system simultaneously. Additional feature incorporates a
breakaway rudder system .
Plain alloy finish.
PRICE:
$99.00
inc GST.
Export price
AU$ 90.00 |
 |
Large Hydro Turn Fin
Large Gas Hydro Turn Fin with mounting brackets
and bolts.
Made from 6061-T6 aircraft quality
aluminium
in Plain alloy finish.
PRICE:
$60.00
inc GST.
Export price
AU$ 54.55 |
 |
Standard Servo Tray
Standard size Aluminium Servo Tray with bolts. Plain
alloy finish.
PRICE:
$16.50
inc GST.
Export price
AU$ 15.00 |
 |
1/4
Scale Servo Tray
1/4 Scale Aluminium Servo Tray with bolts. Plain
alloy finish.
PRICE:
$17.50
inc GST.
Export price
AU$ 15.90 |
 |
Transom Pipe Mount
Gas Tuned Pipe Mount with bolts is made from
6061-T6 aircraft quality aluminium in
plain alloy finish.
PRICE:
$24.50
inc GST.
Export price
AU$ 22.30 |
 |
WT-257
/ WT-929 Throttle Arm
Carburetor Throttle Arm to suit WT-257 / WT-929
carbs.
Made
from 6061-T6 aircraft quality aluminium
in plain alloy finish.
PRICE:
$10.90
inc GST.
Export price
AU$ 9.90 |
 |
Throttle Bellcrank
Throttle Bellcrank Arm.
Made
from 6061-T6 aircraft quality aluminium
in plain alloy finish.
PRICE:
$12.50
inc GST.
Export price
AU$ 11.40 |
 |
1/4"
Shaft Saver
1/4" Flex Shaft Saver is made from 6061-T6
Aircraft alloy and includes 2 S/S set screws in plain alloy finish.
PRICE:
$6.70
inc GST.
Export price
AU$ 6.10 |
 |
Cowl Locks
O-Ring style Cowl Locks with mounting hardware.
(Pack of 2)
This effective
design allows you to securely close the cowl cover on your boat after you
start the engine but still gives you quick and easy access to the engine
compartment.
PRICE:
$12.50
inc GST.
Export price
AU$ 11.40 |
 |
Zero Drag Seals
Zero Drag Crankshaft Seals made from high
quality Bronze to suit Zenoah crankshafts. (Pack of 2)
PRICE:
$23.00
inc GST.
Export price
AU$ 20.90 |
 |
T-Bar for 5/16" Tube and 5" Engine Rails
New T-Bar with Grease fitting built right in.
Now greasing the flex shaft is as easy as putting gas in. Made to fit 5/16
stuffing tube.
Plain alloy finish.
PRICE:
$46.60
inc GST.
Export price
AU$ 42.40 |
|
More products coming soon !! |
|
